|
DESCRIPTION |
SPECIFICATIONS |
LOT CHARGE |
| Anodic Coating/Alum. Alloys |
MIL-A-8625 |
$ 95.00 |
| Anodize Clear |
|
$ 85.00 |
| Anodize w/Di-Chromate Seal |
|
$ 100.00 |
| Anodize-Dyed |
|
$ 100.00 |
| Hard Anodize, Type III |
|
$ 135.00 |
| Masking w/ Stop-Off Lacquer 24hr. Dry Time |
|
$ 75.00 |
| Masking/Plugging Hole Prior Add |
|
$ 50.00 |
| Special Masking Tape Add |
|
$ 50.00 |
| Racking and Unracking Parts |
|
$ 25.00 |
| |
|
|
| Alodine, Class 1A |
MIL-C-5541 |
$ 90.00 |
| Alodine Class III |
|
$ 90.00 |
| Masking/Plugging Holes Prior |
|
$ 50.00 |
| Masking w/ Stop-ff Lacquer 24hr Dry Time |
|
$ 75.00 |
| Racking and Unracking Parts |
|
$ 25.00 |
| |
|
|
| Copper Plating |
|
$ 100.00 |
| |
|
|
| Zinc Phosphate-Light |
TT-C-490 |
$ 100.00 |
| Zinc Phosphate-Heavy |
DOD-P-16232 |
$ 100.00 |
| Manganese Phosphate Heavy |
DOD-P-16232 |
$ 100.00 |
| Coating Weights Needed for Zn Phosphate Plus |
|
$ 75.00 |
| Coating Weights Needed for Manganase Phosphate Plus: |
|
$ 75.00 |
| |
|
|
| Zinc Plating Via Racking |
|
$ 110.00 |
| Zinc Plating Via Barrell Plating |
|
$ 125.00 |
| Zinc Plating-Clear Zinc |
|
$ 110.00 |
| |
|
|
| Cleaning/Pre-Treatments/Ferrous |
|
$ 85.00 |
| |
|
|
| Silver Plating |
|
$ 250.00 |
| |
|
|
| Passivation/Corrosion Resistance |
QQ-P-35 |
$ 105.00 |
| Plus Add for Chart Testing |
|
|
| |
|
|
| Black Oxide on Steel |
|
$ 100.00 |
| Black Oxide on Stainless Steel |
|
$ 110.00 |
| Black Oxide on Copper |
|
$ 150.00 |
| Special Oil Processing Follow-Up on Black Oxide |
|
$ 120.00 |
| |
|
|
| Tin Plating |
|
$ 110.00 |
| |
|
|
| Electroless Nickel on Steel Substrates @ .0005 |
|
$ 100.00 |
| Electroless Nickel on Steel Substrates @ .001 |
|
$ 180.00 |
| Electroless Nickel on Aluminum Substrates @ .0005 |
|
$ 120.00 |
| Electroless Nickel on Aluminum Substrates @ .001 |
|
$ 220.00 |
| Electroless Nickel on Steel Substrates @ .0015 |
|
$ 240.00 |
| Electroless Nickel on Steel Substrates @ .002 |
|
$ 220.00 |
| Add for Baking an hourly rate of |
|
$ 25.00 |
| Acid Etching on Aluminum Alloys |
|
$ 75.00 |
| Heat Treatment of Aluminum or Steel Parts |
|
$ 25.00 |
| Painting |
MIL-C-46168 |
|
| Plus the Cost of Paint or Kit |
|
|
| Priming |
MIL-P-530022 |
$ 120.00 |
| Plus the Cost of Primer |
|
|
| Part Marking and Fill Engraving |
|
$ 100.00 |
| Small Lab Oven Hour Rate for 24 Hours Only |
|
$ 25.00 |
| Masking Hour Rate per person |
|
$ 30.00 |
| Masking Helper |
|
$ 30.00 |
| Paint Shop Helper to Hang Parts on Monorail |
|
$ 25.00 |
| Bead Blasting |
|
$ 120.00 |
| Bake Time per Hour |
|
$ 30.00 |
| Hydrogen Embrittlement Relief per Hour |
|
$ 30.00 |
| Coating Weight Testing |
DOD-P- |
$ 75.00 |
| Passivation Test-w/o Testing |
|
$ 75.00 |
| Passivation w/ Wet Dry Testing |
|
$ 160.00 |
| Salt Spray Testing |
|
$ 224.00 |
| Type 5-Anodize-Aluminum 336hrs/14 Days |
|
$ 220.00 |
| Type 7-Alodine-Aluminum 168hrs/7 Days |
|
$ 168.00 |
| Type 2-Nickel-Steel 100hrs/4 Days. 4hrs |
|
$ 100.00 |
| Type 1-Black Oxide-Steel Smut Test |
|
$ 120.00 |
| Type 1-Black Oxide Stainless Steel 96hrs/4 Days |
|
$ 224.00 |
| Type 1-Tin-Steel- 24hrs and Adhesion Test |
|
$ 224.00 |
| Adhesion Test |
|
$ 96.00 |
| Type 1-Copper-Steel- Adhesion |
|
$ 96.00 |
| Type 1-Clear Chromate-Steel- 12hrs |
|
$ 96.00 |
| Type 1-Yellow Chomate-Steel 96hrs/4 Days |
|
$ 96.00 |
| Type 1-Zinc Phosphate-Steel 2hrs |
|
$ 75.00 |
| Type 1-Manganese Phosphate-Steel 1.5 hrs |
|
$ 75.00 |
